 |
Instructions
[ Installation ]-
-
To apply, lightly sand area to be repaired.
Trim patch for required use.
Apply drywall compound 1/8”-1/4" thick directly to back of patch.
Place patch over center of repair and wipe down flat to wall using joint knife.
Immediately skim-coat patch and let dry.
Apply second coat, let dry, and sand.
Compound that remains on backside of Roll-Patch makes patch very rigid in the damaged area.
REPAIRS OVER PAINTED SURFACES
Strait-Flex - recommends the use of Strait-Flex Super-Bond or latex paint, mixed with
- all-purpose joint compound to enhance bondability.
|
|
 |